60G Sleep Monitoring Millimeter-wave Radar to record human biological existence and motion, ST-BD60A1-W

INTRODUCTION

The sleep monitoring radar ST-BD60A1-W is based on the millimeter-wave radar system to realize the perception of human biological existence and human motion, and can continuously record the existence of the human body. It will judge the sleep state, breathing and heart rate of the target in real time according to the changes in body movement range and breathing and heart rate during sleep, and output a sleep score after a period of sleep. It is also integrated into the health application according to its relevant sleep parameters. ST-BD60A1-W needs to be mounted on the wall on its side. Sleep breathing function detection is not affected by factors such as temperature, humidity, noise airflow, dust, and light.

FUNCTION

1) Sleep quality assessment
Record sleep status and time, evaluate sleep quality

2) Respiratory rate statistics
Respiration detection, record respiratory rate

3) Heart rate frequency statistics
Heart rate detection, record heart rate frequency

 

INSTRUCTION

(1) Install the product obliquely above the head of the bed, and use a bracket to fix the angle at 45°.

(2) Align the radar base with the buckle of the mounting bracket, and fix the radar in the direction of rotation;

(3) The product has an elliptical shape, the long side is the longer distance of the radar, and the short side is the shorter distance

(4) Power on the device, configure the network, and connect to the App

Precautions:
* In order to ensure the accuracy of radar detection, please combine with the corresponding bracket for tilt installation!

The radar is installed obliquely with an inclination angle of 45°. It is installed above the head of the bed. The radar installation height is recommended to be 1m higher than the bed surface to ensure that the main beam of the radar covers the detection area. There should be no obvious obstructions or coverings in front of the radar. Affected by the radar installation height and radar beam range, in this installation mode, the maximum distance for human presence detection L3 ≈ 2.5 meters; the maximum distance for sleep detection L2 ≈ 2.5 meters; the maximum distance for human respiratory frequency detection L1 ≈ 1.5 meters.